Servo Powerheads

SV-310

SV-310

Orbitform’s servo-driven powerhead offers precision control, variable advance and retract rates and a range of forming forces for the most delicate to the most technically demanding assembly applications. The innovative powerhead with servo drive provides the control you need with the speed you want. Orbitform servo powerheads offer forming forces from 1 lb to over 3,000 lbs, a stroke of 2.5 inches, and advance/retract speeds from 0.005 to 4 inches per second. Models and drawings coming soon…

Specs

Head Forming Capacity

3/8"

Max Downward Force

3000

Max Stroke

2.5"

Optimum Use

  • Reduces Cycle Time, can advance and retract up to 4 inches per second
  • Process validation
  • Form to a force and a distance
  • Save multiple programmed heights
  • Alternative to pneumatic or hydraulic
  • High precision forming
  • Precision programmed dwell in both position and time to reduce spring-back after forming
  • Perfect for precision articulating joints

Special Considerations

  • Pressure Pads (part clamping and height sensing)
  • Columns with height adjustment
  • Multiple tooling configurations
  • Turn-key systems available

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

SV-500

SV-500

Orbitform’s servo-driven powerhead offers precision control, variable advance and retract rates and a range of forming forces for the most delicate to the most technically demanding assembly applications. The innovative powerhead with servo drive provides the control you need with the speed you want. Orbitform servo powerheads offer forming forces from 1 lb to over 3,000 lbs, a stroke of 2.5 inches, and advance/retract speeds from 0.005 to 4 inches per second. Models and drawings coming soon…

Specs

Head Forming Capacity

9/16"

Max Downward Force

5000

Max Stroke

2.5"

Optimum Use

  • Reduces Cycle Time, can advance and retract up to 4 inches per second
  • Process validation
  • Form to a force and a distance
  • Save multiple programmed heights
  • Alternative to pneumatic or hydraulic
  • High precision forming
  • Precision programmed dwell in both position and time to reduce spring-back after forming
  • Perfect for precision articulating joints

Special Considerations

  • Pressure Pads (part clamping and height sensing)
  • Columns with height adjustment
  • Multiple tooling configurations
  • Turn-key systems available

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

SV-750

SV-750

Orbitform’s servo-driven powerhead offers precision control, variable advance and retract rates and a range of forming forces for the most delicate to the most technically demanding assembly applications. The innovative powerhead with servo drive provides the control you need with the speed you want. Orbitform servo powerheads offer forming forces from 1 lb to over 3,000 lbs, a stroke of 2.5 inches, and advance/retract speeds from 0.005 to 4 inches per second. Models and drawings coming soon…

Specs

Head Forming Capacity

3/4"

Max Downward Force

7500 lbs

Max Stroke

2.5"

Optimum Use

  • Reduces Cycle Time, can advance and retract up to 4 inches per second
  • Process validation
  • Form to a force and a distance
  • Save multiple programmed heights
  • Alternative to pneumatic or hydraulic
  • High precision forming
  • Precision programmed dwell in both position and time to reduce spring-back after forming
  • Perfect for precision articulating joints

Special Considerations

  • Pressure Pads (part clamping and height sensing)
  • Columns with height adjustment
  • Multiple tooling configurations
  • Turn-key systems available

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

Related Content