Radial Bench Machines

BR-125

BR-125

The radial forming and riveting process is similar to the orbital forming and riveting process, but with radial, the material is displaced from the center outward in a floret pattern. The radial riveting process is often the optimal assembly solution when working with small rivet shank diameters, delicate rivet materials or unsupported rivet assembly applications. Orbitform will help you define the appropriate riveting process for your application.

Specs

Head Forming Capacity

.125" (3.2 mm)

Max Stroke

1.5" (138 mm)

Max Downward Force

590 lbs @ 100 psi

Weight

150 lbs (68 kg)

Width

6.88" (174.8 mm)

Depth

14.75" (374.7 mm)

Throat Depth

4.5" (114.3 mm)

Height

35.75" (908.1)

Base Height

4.0" (101.6 mm)

Optimum Use

  • Minimal rivet shank swell
  • Works with delicate products
  • Controllable forming process
  • Can form a vast array of materials

Special Considerations

  • Uses pneumatics - eliminates air/oil tanks
  • Aesthetically appealing finished form
  • Articulating and fixed joints
  • Multiple peen configurations for variety of head forms

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

BR-240

BR-240

The radial forming and riveting process is similar to the orbital forming and riveting process, but with radial, the material is displaced from the center outward in a floret pattern. The radial riveting process is often the optimal assembly solution when working with small rivet shank diameters, delicate rivet materials or unsupported rivet assembly applications. Orbitform will help you define the appropriate riveting process for your application.

Specs

Head Forming Capacity

.236" (6 mm)

Max Stroke

.175" (44.5 mm)

Max Downward Force

1460 lbs @ 100 psi

Weight

250 lbs (113.4 kg)

Width

8.75" (222.3 mm)

Depth

14.75" (374.7 mm)

Throat Depth

4.5" (114.3 mm)

Height

35.75" (908.1 mm)

Base Height

4.0" (101.6 mm)

Optimum Use

  • Minimal rivet shank swell
  • Works with delicate products
  • Controllable forming process
  • Can form a vast array of materials

Special Considerations

  • Uses pneumatics - eliminates air/oil tanks
  • Aesthetically appealing finished form
  • Articulating and fixed joints
  • Multiple peen configurations for variety of head forms

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

BR-310

BR-310

The radial forming and riveting process is similar to the orbital forming and riveting process, but with radial, the material is displaced from the center outward in a floret pattern. The radial riveting process is often the optimal assembly solution when working with small rivet shank diameters, delicate rivet materials or unsupported rivet assembly applications. Orbitform will help you define the appropriate riveting process for your application.

Specs

Head Forming Capacity

.312" (8 mm)

Max Stroke

2.0" (51 mm)

Max Downward Force

2120 lbs @ 100 psi

Weight

580 lbs (263.1 kg)

Width

11.0" (279.4 mm)

Depth

19.0" (482.6 mm)

Throat Depth

6.25" (158.8 mm)

Height

36.625" (930.3 mm)

Base Height

4.75" (120.7 mm)

Optimum Use

  • Minimal rivet shank swell
  • Works with delicate products
  • Controllable forming process
  • Can form a vast array of materials

Special Considerations

  • Uses pneumatics - eliminates air/oil tanks
  • Aesthetically appealing finished form
  • Articulating and fixed joints
  • Multiple peen configurations for variety of head forms

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

BR-500

BR-500

The radial forming and riveting process is similar to the orbital forming and riveting process, but with radial, the material is displaced from the center outward in a floret pattern. The radial riveting process is often the optimal assembly solution when working with small rivet shank diameters, delicate rivet materials or unsupported rivet assembly applications. Orbitform will help you define the appropriate riveting process for your application.

Specs

Head Forming Capacity

0.500"

Max Stroke

2.5

Max Downward Force

4400 lbs

Weight

1000 lbs

Width

16.0"

Depth

27.0"

Throat Depth

9.0"

Height

50.0"

Base Height

6.0"

Optimum Use

  • Minimal rivet shank swell
  • Works with delicate products
  • Controllable forming process
  • Can form a vast array of materials

Special Considerations

  • Uses pneumatics - eliminates air/oil tanks
  • Aesthetically appealing finished form
  • Articulating and fixed joints
  • Multiple peen configurations for variety of head forms

Options

SERVO ADJUSTABLE HARD STOP: Automatically set the stroke length with a servo and adjust stroke between cycles.

OFFSET MOTOR MOUNT: Offset the motor from the powerhead, freeing up space for more mounting options or process monitoring

CLUTCH BRAKE: Stop the spindle from spinning without shutting down the powerhead motor

GEAR REDUCER: Finely tune your powerhead speed to better control the process.

PROGRAMMABLE HEIGHT SENSING PRESSURE PAD: Work with other process monitoring to provide precision when compressing stacked parts.

LVDT STROKE MONITORING: Monitor stroke distance and increase precision and consistent head forming.

ANTI-ROTATE DEVICE: Keep the peen from rotating.

LOADCELL FORCE MONITORING: Force readouts and process optimization.

REMOTE STROKE ADJUST: Allows for access to the stroke adjust knob when the standard location is difficult to reach.

THROUGH SPINDLE PRESSURE PAD FOR ROLLER HEADS: Compress part prior to forming to ensure proper assembly and maintain consistency.

Related Content