Pneumatic Powerheads for Orbital Forming

Specifications:

Head Forming Capacity:	0.125" (3.2mm)
Max Stroke:	1.5" (38.0mm)
Max Thrust:	590 lbs @ 100 psi
Weight:	80 lbs
Air Consumption:	16 cubic in.
SCFM @ 100 psi:	.72
Width:	4.0" (101.6mm)
Depth:	5.0" (127.0mm)
Throat Depth:	3.0" (76.2mm)
Height:	18.0" (452.0mm)

Options:

Servo Adjustable Hard Stop: Not Available
Offset Motor Mount: Not Available
Clutch Brake: Not Available
Gear Reducer: Not Available
Programmable Height Sensing Pressure Pad: Work with other process monitoring to provide precision when compressing stacked parts
LVDT Stroke Monitoring: Monitor stroke distance and increase precision and consistent head forming
Anti-Rotate Device: Keep the peen from rotating
Loadcell Force Monitoring: Force readouts and process optimization
Remote Stroke Adjust: Not Available
Through Spindle Pressure Pad for Roller Heads: Not Available

Specifications:

Head Forming Capacity:	0.236" (6.0mm)
Max Stroke:	1.75" (44.45mm)
Max Thrust:	1460 lbs @ 100 psi
Weight:	100 lbs
Air Consumption:	46 cubic in.
SCFM @ 100 psi:	2.07
Width:	5.5" (139.7mm)
Depth:	6.5" (127.0mm)
Throat Depth:	3.75" (95.2mm)
Height:	18.75" (479.0mm)

Options:

Servo Adjustable Hard Stop: Automatically set the stroke length with a servo and adjust stroke between cycles
Offset Motor Mount: Automatically set the stroke length with a servo and adjust stroke between cycles
Clutch Brake: Not Available
Gear Reducer: Not Available
Programmable Height Sensing Pressure Pad: Work with other process monitoring to provide precision when compressing stacked parts
LVDT Stroke Monitoring: Monitor stroke distance and increase precision and consistent head forming
Anti-Rotate Device: Keep the peen from rotating
Loadcell Force Monitoring: Force readouts and process optimization
Remote Stroke Adjust: Allows for access to the stroke adjust knob when the standard location is difficult to reach
Through Spindle Pressure Pad for Roller Heads: Compress part prior to forming to ensure proper assembly and maintain consistency

Specifications:

Head Forming Capacity:	.312" (7.92mm)
Max Stroke:	2.0" (51.0mm)
Max Thrust:	2120 lbs @ 100 psi
Weight:	120 lbs
Air Consumption:	62 cubic in.
SCFM @ 100 psi:	2.80
Width:	7.0" (177.8mm)
Depth:	8.75" (222.0mm)
Throat Depth:	5.25" (133.5mm)
Height:	24.5" (620.0mm)

Options:

Servo Adjustable Hard Stop: Automatically set the stroke length with a servo and adjust stroke between cycles
Offset Motor Mount: Automatically set the stroke length with a servo and adjust stroke between cycles
Clutch Brake: Stop the spindle from spinning without shutting down the powerhead motor
Gear Reducer: Finely tune your powerhead speed to better control the process
Programmable Height Sensing Pressure Pad: Work with other process monitoring to provide precision when compressing stacked parts
LVDT Stroke Monitoring: Monitor stroke distance and increase precision and consistent head forming
Anti-Rotate Device: Keep the peen from rotating
Loadcell Force Monitoring: Force readouts and process optimization
Remote Stroke Adjust: Allows for access to the stroke adjust knob when the standard location is difficult to reach
Through Spindle Pressure Pad for Roller Heads: Compress part prior to forming to ensure proper assembly and maintain consistency

Specifications:

Head Forming Capacity:	.500" (12.7mm)
Max Stroke:	2.5" (63.5mm)
Max Thrust:	4400 lbs @ 100 psi
Weight:	240 lbs
Air Consumption:	208 cubic in.
SCFM @ 100 psi:	9.39
Width:	9.5" (241.0mm)
Depth:	12.75" (323.0mm)
Throat Depth:	8.0" (203.0mm)
Height:	26.5" (677.0mm)

Options:

Servo Adjustable Hard Stop: Automatically set the stroke length with a servo and adjust stroke between cycles
Offset Motor Mount: Automatically set the stroke length with a servo and adjust stroke between cycles
Clutch Brake: Stop the spindle from spinning without shutting down the powerhead motor
Gear Reducer: Finely tune your powerhead speed to better control the process
Programmable Height Sensing Pressure Pad: Work with other process monitoring to provide precision when compressing stacked parts
LVDT Stroke Monitoring: Monitor stroke distance and increase precision and consistent head forming
Anti-Rotate Device: Keep the peen from rotating
Loadcell Force Monitoring: Force readouts and process optimization
Remote Stroke Adjust: Allows for access to the stroke adjust knob when the standard location is difficult to reach
Through Spindle Pressure Pad for Roller Heads: Compress part prior to forming to ensure proper assembly and maintain consistency

Specifications:

Head Forming Capacity:	.750" (19.05mm)
Max Stroke:	2.5" (63.5mm)
Max Thrust:	7510 lbs @ 100 psi
Weight:	350 lbs
Air Consumption:	643 cubic in.
SCFM @ 100 psi:	16.43
Width:	9.5" (241.0mm)
Depth:	12.75" (324.0mm)
Throat Depth:	8.0" (203.0mm)
Height:	31.5" (798.0mm)

Options:

Servo Adjustable Hard Stop: Automatically set the stroke length with a servo and adjust stroke between cycles
Offset Motor Mount: Automatically set the stroke length with a servo and adjust stroke between cycles
Clutch Brake: Stop the spindle from spinning without shutting down the powerhead motor
Gear Reducer: Finely tune your powerhead speed to better control the process
Programmable Height Sensing Pressure Pad: Work with other process monitoring to provide precision when compressing stacked parts
LVDT Stroke Monitoring: Monitor stroke distance and increase precision and consistent head forming
Anti-Rotate Device: Keep the peen from rotating
Loadcell Force Monitoring: Force readouts and process optimization
Remote Stroke Adjust: Allows for access to the stroke adjust knob when the standard location is difficult to reach
Through Spindle Pressure Pad for Roller Heads: Compress part prior to forming to ensure proper assembly and maintain consistency

Specifications:

Head Forming Capacity:	.840" (21.4mm)
Max Stroke:	2.5" (63.5mm)
Max Thrust:	12,700 lbs @ 100 psi
Weight:	500 lbs
Air Consumption:	62 cubic in.
SCFM @ 100 psi:	2.80
Width:	7.0" (177.8mm)
Depth:	8.75" (222.0mm)
Throat Depth:	5.25" (133.5mm)
Height:	24.5" (620.0mm)

Options:

Servo Adjustable Hard Stop: Automatically set the stroke length with a servo and adjust stroke between cycles
Offset Motor Mount: Automatically set the stroke length with a servo and adjust stroke between cycles
Clutch Brake: Stop the spindle from spinning without shutting down the powerhead motor
Gear Reducer: Finely tune your powerhead speed to better control the process
Programmable Height Sensing Pressure Pad: Work with other process monitoring to provide precision when compressing stacked parts
LVDT Stroke Monitoring: Monitor stroke distance and increase precision and consistent head forming
Anti-Rotate Device: Keep the peen from rotating
Loadcell Force Monitoring: Force readouts and process optimization
Remote Stroke Adjust: Allows for access to the stroke adjust knob when the standard location is difficult to reach
Through Spindle Pressure Pad for Roller Heads: Compress part prior to forming to ensure proper assembly and maintain consistency

Standard Products

Powerheads - Pneumatic

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Featured Content

Process Monitoring in Assembly: What to Measure (and Why It Matters)

The Basketizer: A Smarter Way to Keep Your Machines Running

Lab Testing and Process Development: What to Expect

Standard Products

Powerheads - Pneumatic

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Specifications:

Options:

Featured Content

Process Monitoring in Assembly: What to Measure (and Why It Matters)

The Basketizer: A Smarter Way to Keep Your Machines Running

Lab Testing and Process Development: What to Expect

Orbitize Your Inbox