Standard Products

Orbital Heads - Long Reach

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

HL-200 HL-250 HL-310 HL-500 HL-625 HL-700 HL-750

Specifications:

Capacity:	.15" (3.81mm)
Peen Diameter:	.313" (7.95mm)
Peen Angle:	4°
Peen Length:	2.188" (55.58mm)

Specifications:

Capacity:	.180" (4.57mm)
Peen Diameter:	.312" (7.92mm)
Peen Angle:	4°
Peen Length:	3.5" (88.9mm)

Specifications:

Capacity:	.312" (7.92mm)
Peen Diameter:	.312" (7.92mm)
Peen Angle:	4°
Peen Length:	3.5" (88.9mm)

Specifications:

Capacity:	.5" (12.7mm)
Peen Diameter:	.5" (12.7mm)
Peen Angle:	4°
Peen Length:	3.875" (98.42mm)

Specifications:

Capacity:	.63" (16.0mm)
Peen Diameter:	.63" (16.0mm)
Peen Angle:	3°
Peen Length:	5.75" (146.0mm)

Specifications:

Capacity:	.75" (19.05mm)
Peen Diameter:	.75" (19.05mm)
Peen Angle:	6°
Peen Length:	5.0" (127.0mm)

Specifications:

Capacity:	.75" (19.05mm)
Peen Diameter:	.75" (19.05mm)
Peen Angle:	4°
Peen Length:	5.0" (127.0mm)

Standard Products

Orbital Heads - Long Reach

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Specifications:

Featured Content

Lab Testing and Process Development: What to Expect

From Manual to Semi-Automated Assembly A Step by Step Upgrade Path

Force vs. Torque vs. Joint Strength: What You Should Actually Spec