Search

Request A Quote Contact

Long Reach Orbital Head

HL–200
HL–250
HL–310
HL–500
HL–625
HL–700
HL–750

HL–200

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.15" (3.81 mm)

Peen Diameter

.313" (7.95 mm)

Peen Angle

4º

Peen Length

2.188" (55.58 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

HL–250

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.180" (4.57 mm)

Peen Diameter

.312 " (7.92 mm)

Peen Angle

4º

Peen Length

3.5" (88.9 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

HL–310

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.312" (7.92 mm)

Peen Diameter

.312 " (7.92 mm)

Peen Angle

4º

Peen Length

3.5" (88.9 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

HL–500

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.50" (12.7 mm)

Peen Diameter

.50" (12.7 mm)

Peen Angle

4º

Peen Length

3.875" (98.42 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

HL–625

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.63" (16 mm)

Peen Diameter

.63" (16 mm)

Peen Angle

3º

Peen Length

5.75" (146 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

HL–700

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.75" (19.05 mm)

Peen Diameter

.75" (19.05 mm)

Peen Angle

6º

Peen Length

5.0" (127 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

HL–750

The HL Series has a longer reach forming peen, making it easier to form the rivet. It is normally available with a 4º forming angle, with some ranging from 3° to 6°, requiring more downforce than the HS Series. With the extra downforce, shank swell is a possibility, making formed rivets locked in place and more resistant to joint fatigue.

Specs

Capacity

.75" (19.015 mm)

Peen Diameter

.75" (19.05 mm)

Peen Angle

4º

Peen Length

5.0" (127 mm)

Maintenance

Through proper care and maintenance, it is possible to keep your orbital heads running as smoothly as the day you bought it. With our orbital heads, you know the performance will stay optimal for years to come.

Peens

There are a wide variety of standard peens that are used with Orbital heads, each with a different purpose. Some ensure a certain aesthetic appearance while others are capable of flaring or crimping. Contact our engineers to get expert advice on choosing the right peen.

Related Content

Strategic Acquisitions - A Story of Growth

Since 1984, Orbitform has been evolving with the best interests of our customers. Here's our story of perpetual growth.

Read More

The New Servo Powerhead

Precision Control in a Clean Environment

Read More

Orbital Riveting & Forming

Smooth, Non-Impact Forming Solutions

Read More

What is Permanent Part Assembly?

Take Advantage of Orbitform's Permanent Assembly Processes

Read More

What is Orbital Forming & Riveting?

Smooth Non-Impact Forming Solutions

Read More