Product Milford 63 FC, Riveters, Riveting, Riveting Machines, Riveting Equipment at Orbitform.com

Product Specifications

Rivet Diameter	.094 inch
Rivet Length	.562 inch
Throat Depth	6.25 inch
Stroke	2 inch
Power Method	Mechanical / Pneumatic

The Milford Model 63-FC is an electro-mechanical, flywheel driven, bench-top riveting machine; designed for operator loaded assembly applications. This single spindle, dual driver riveter will automatically feed and set two semi-tubular rivet per cycle. Our standard unit comes equipped with a 120 volt motor, and controls for footswitch actuation.

Typical applications where these units are used include HVAC assemblies, hinged assemblies, furniture components, appliance components, electrical devices, brake shoes, etc.

Model 63-FC Specifications

Capacity: Up to (2) .093" (2.38 mm) diameter x .562" (14.28 mm) long, mild steel semi-tubular rivets
Maximum center distance between rivets: .75" (19.0 mm)
Throat depth: 6.25" (158.75 mm)
Hopper type: (2) 5.25" dia. mechanical
Ram stroke: 2.00" (50.8 mm)
Machine cycle time: 0.4 second
Overall height: 29" (730 mm)
Footprint: 18" x 24" (450 mm x 610 mm)
Weight: 280 lb. approx.
Machine actuation: Standard unit shipped with guarded footswitch.
Tooling: Machine is shipped with one (1) set of tools (Jaws, Driver, Rollset)

Recommended Options:

(2) Quick Change raceways (What's This) w/ (2) sets of tooling (Jaw/Driver/Rollset)
Probe type safety device
Spare tooling package (2 Jaws / 3 Drivers / 4 Rollsets)
Narrow Anvil Arm w/steel insert (customer part defined)
Dual Opto-touch actuation upgrade (requires part holding fixture)
Part Holding Fixture