Product B-125, live spindle, hydraulic, extended stroke, assembly, fastening, orbital riveting, peening, Powerhead, orbital forming, assembly, riveting, metal forming, at Orbitform.com

Product Specifications

Max Stroke	1.50 inch
Max Downward Force	590 lbs
Type	Pneumatic
Capacity	.125 inch

Model B-125 standard features:

M-125 lubed for life* Powerhead with 1/9 hp, 1725 rpm, 115V/50-60Hz/1 electric motor (alternate voltage specifications upon request)

Cast Column Assembly with 5" (127mm) of vertical Powerhead height adjustment & t-slot base

HS-250 orbital head and developed peen

Dual low actuation force palm buttons

Pneumatic solenoid valves

Filter-regulator unit with gauge

Digital adjustable dwell timer

Resettable cycle counter

Electrical enclosure with disconnect switch

Illuminated power on selector switch

Manual/automatic mode selector switch

Manual jog advance/return selector switch

Programmable Logic Controller

Specifications

Approximate weight - 185 lbs

Capacity (maximum force @ 100 psi): 590 lbs.

Tool stroke is adjustable from .06" to 1.50"

Standard throat depth: 3.50"

Orbital forming capacity to .125"(3.17 mm) diameter in mild steel or an equivalent area in tubing, square or other form

Available options:

Machine base w/wo casters 24"W x 24"L x 30"H
Orbital Alignment Kit
Light curtains
Guarding
PLC expansion for an additional I/O
Air line lubricator
Custom part fixturing
Pneumatic fixture slide
Process Intelligence Package: Load Cell, LVDT (Linear Variable Displacement Transducer), Touch Screen

*Orbitform Powerhead seals are lubricated with Accrolube grease at the factory. This lubrication should provide satisfactory operation and cycle life. The use of lubricated air will however help to extend cycle life.